2025 SnowEx® POWER PUSHER™ TRACE™ Edge Technology 16'

2025 SnowEx® POWER PUSHER™ TRACE™ Edge Technology 16'

When you commit to clearing a lot, you mean it. No snow left behind. But not all plows are created equal. With TRACE™ edge technology, the POWER PUSHER™ plows move massive amounts of snow—scraping down to the pavement—so you can save the time and money of dropping salt.

Features may include:

• The terrain-response advanced cutting edge is comprised of independent, 2' sections that raise, oscillate, and trip to accommodate contours and obstacles in the plowable surface. Working together, the sections remove more snow, reducing the amount of salt required. Two greasing locations allow the operator to keep the components well lubricated for maximum performance.

• A common attachment plate with a floating coupler makes installation easy with a wide variety of equipment and machinery, including skid-steers, wheel loaders, backhoes, and tractors. The floating coupler reduces negative down pressure from the vehicle, protecting against premature wear of the pusher cutting edge and components.

• Operation of the POWER PUSHER plow is conveniently tied into the equipment’s controls. Simply raise and lower the lift arm and angle the attachment plate to position the pusher in the correct orientation.

• The side plates ensure the TRACE edge remains in direct contact with the plowable surface. The reversible, bolt-on shoe makes serviceability easy, allowing you to use both edges of the shoe before replacing. The bolt-on design makes replacement in the field possible with a ¾" socket, ratchet, and 3/4" wrench.

• The POWER PUSHER plow withstands the most grueling commercial snow removal conditions. Each 2' section comes standard with a 3/4" cutting edge with carbide insert that extends the life of a high-carbon blade up to 20 times. And each section uses the same part number for easy replacement. No need to replace the full cutting edge, only the sections that show wear.

• When you purchase a 14’ or 16’ width pusher, you gain the advantage of two plow widths in one pusher. Remove the bolt on 2’ extensions on each end of the pusher to transition a 16’ into a 12’ option or a 14’ into a 10’ option. This increases flexibility for multiple property types that may benefit from a smaller pusher that is easier to maneuver.